Sometimes in life you meet someone and you two instantly click, and before you know it both of you are at the altar saying “I do”. This is something everybody goes through and I’m pretty sure you have too; after that you two wanted kids, you tried and now you two are expecting. Thankfully you had made enough money in your life that you can afford a nice house for you and your family, you could buy a house. You had a really great offer but the only thing that’s off putting is the wood paneling that looks like its straight out of the 1970s, of course it can be worked on so you take the house and now want to work on fixing that little problem. This is how you paint your wooden panels:
Start by cleaning the wooden panels with a damp rag. This will remove any dirt or dust as well as remove any oil or grease, though for maximum effect use some sort of cleaner along with it.
Next up you apply the putty and fill any small holes and imperfections that are on the surface. Allow this to dry and then proceed to the next step.
Sand the paneling with 100 grit sandpaper using a pole sander, sanding block, or orbital sander. This will take the sheen off the finish, which will allow the paint to adhere to it better. Don't get carried away and sand the surface down to the bare wood -- just enough to rough up the existing finish. Do the same to wood trims in additions to wooden panels, just use a hand sander. Clean the walls with a damp cloth when completed.
Cover the floor with drop cloths, and mask any areas you wish to protect with painter's tape.
Use a roller with a medium nap to paint the paneling. It should have a long enough nap to fill the vertical grooves in the paneling, but short enough to leave a smooth surface.
Primer and paint:
You can’t just go ahead and apply paint to the wood, that will be very sloppy work indeed. You need to prime it first with a latex stain blocking primer; once the primer has dried, topcoat it with two coats of latex wall paint.
Repeat for Trim:
Prime the trim with a primer. Topcoat the trim using either oil or latex enamel as desired.
That is the end for a step by step walkthrough on how to paint wood paneling. To paint wooden panels requires a lot of time and energy, but the end result looks great. And compared to the alternative it requires the least effort, I.e removing the wall completely and putting in a drywall. In any case, you now know enough to take care of any paint jobs on wooden panels you may possibly have. If you’re not really confident about it, you can always hire a professional.