If you take a walk around any business district in a top class city, you would find a good number of buildings with aluminum composite panels on the exteriors. This has become more of a fashion today rather than a necessity. However, one thing is certain. The building gets an attractive look. No one can deny this fact. The aluminum panels have their own advantages. We shall go through the same. However, we shall look at the aluminum composite panel installation as well.

It is not a very difficult job to install the panels. The first job would be to inspect the building thoroughly. The building should be either a square or a rectangular one. Then, the job of installing the panels becomes easy. One should install the plum lines at the important junctions to take care of the alignment properly. Having straight walls always makes it easy for the installation.

One has to attach the clips to the frame of the building. On installing the clips, you can proceed with the alignment of panels accordingly. Fastening the clip to the wall is an art by itself. You should not overdo the fastening. Otherwise, you may end up shearing the outer layer of the framing. Maintain the proper spacing between composite panels.

One should start the aluminum composite panel installation from the bottom, especially from a corner. You can keep on adding the adjacent panels while adhering to the plum line all the time. This would ensure you install the panels in a straight line. Once you establish the lowest line, adding panels on top should not be a problem. You have to take care of the spacing as well.

It would be normal for you to install certain panels first. They would be the areas near the doors, windows, etc. Having a proper design in place should be the order of the day. You should do a reality check every few panels or so to ensure that they follow the sequence perfectly. Otherwise, you may have to dismantle the entire structure and start again.

Every panel would have a protective film. You should ensure to remove the protective film after the installation of the panels. Certain areas of the building may receive more sunlight than the others do. You should take care of this aspect because excessive exposure to radiation may result in the discoloration of the panels. This can affect the look of the building.

Leave a Reply